Antique weapons designed for inflicting bodily harm or physical damage such as knives, swords, cutlasses, guns, bows, arrows, maces, etc.
sia antion, riga, latvia
A wonderful pair of cased, dueling pistols, the court gunsmith of Nicholas I, Jacob Bertrand, mid-19th century. Octagonal, smoothbore, 11 gauge pistols with fine, gilded engraving of floral motifs, Bertrand St. Petersburg - on the top of the barrel. Markings and serial numbers 205.1 and 205.2 on the bottom of the barrels. Finely crafted wooden handles. Complete set of tools for cleaning and loading. Packed in an original turnkey wooden box with brass decor. High quality cloth interior trim. Gun length: 44 cm. Jacob Bertrand (? - 1849 (?), court and naval departmental gunsmith. In 1830 he started a business in Russia. In 1835–1840 he worked for Javale. At the Moscow exhibition of 1835 he exhibited guns and pistols, at the St. Petersburg exhibition of 1849 - hunting rifles . and the State Historical Museum. Width: 31cm, Height: 50cm, Depth: 8.5cm, Weight: 15kg, Condition: Good, Material: Wood, metal, ID: 8511
£12,516.18
view detailssia antion, riga, latvia
Spear of Kagi-yari. Japan, Shinshinto (Newest Era) period, 1781-1876 (also called the Late Edo period). The classic yari consists of a shaft (ebu or nagae) to which a tip (ho) is attached. The shaft is 1.8-2.5 m long, in cross section, as a rule, round or multifaceted (rather than oval), made of oak or, more rarely, bamboo. The tips were 15-90 cm long and were xiphoid in shape, fastened with a shank (nakago). They allowed to inflict stabbing and chopping blows. Thanks to these tips, yari can be classified as glaives. Sometimes a metal hadome crosspiece was made 30 cm below the tip. Tsuba was common. For more reliable fastening, the end of the shaft was supplied with a fastening sleeve (habaki) and washers (seppa). At the lower end was an undercurrent (ishizuki) that could be used to strike. The upper part of the shaft was varnished and wrapped with a cord (sen-dan-maki). Kagi-yari is a spear with a hook fixed at the base of the tip pointing forward to capture enemy weapons. Length - 205 cm. Width: 20cm, Height: 205cm, Depth: 5cm, Weight: 3kg, Condition: Good, Material: Wood, metal, ID: 6522
£1,726.37
view detailssia antion, riga, latvia
Japanese sword. Wakizashi. 19th century. Steel blade. Wooden, in embossed leather, sheath with a bronze latch decorated with horses. Leather wicker handle, stingray skin, with bronze figures. At the end of the handle is a figurine of a tiger. Welt guard (tsuba) with flowers. Length: 71 cm. Unknown master. Width: 7cm, Height: 71cm, Depth: 6.5cm, Weight: 0.834kg, Condition: Good, Material: Wood, metal, ID: 6082
£2,416.92
view detailssia antion, riga, latvia
Swedish naval saber, officer. 1876 The gilded brass hilt with an anchor is at the same time a limiter for the engraved blade. The handle is in the shape of a lion, covered with stingray leather. Gold sewing lanyard. Leather scabbard with brass. Length: 90 cm. Width: 14cm, Height: 90cm, Depth: 14cm, Weight: 2kg, Condition: Signs of wear commensurate with age, Material: Leather, ID: 5575
£820.03
view detailssia antion, riga, latvia
Bayonet knife. Blade length - 57 cm. Width: 11cm, Height: 70cm, Depth: 3cm, Weight: 0.844kg, Condition: As is, Material: Steel, ID: 5550
£77.69
view detailssia antion, riga, latvia
Shaped sword with a steel hilt and lanyard, in a steel sheath, with a wooden handle. Handle monogram: RFE. Blade engraved: Wingenthal. Width: 13cm, Height: 108cm, Depth: 10cm, Weight: 1.176kg, Condition: As is, Material: Steel, ID: 5549
£328.01
view detailssia antion, riga, latvia
Saber of a Swedish naval officer, second half of the 19th century. Marking JON. SVENGREN EKILSTUNA. Saber in a leather sheath, with decorative brass trim. Engraved with an anchor and coat of arms of Sweden. The length of the saber is about 84 cm. The length of the blade is about 75 cm. Width: 11cm, Height: 84cm, Depth: 7.5cm, Weight: 0.963kg, Condition: Good, with traces of use, Material: Leather, ID: 5503
£1,899.01
view detailssia antion, riga, latvia
Finnish naval officer`s parade saber. The second quarter is the middle of the 20th century. The handle is made of gilded brass. The curved hilt is decorated with the coat of arms of Finland. Steel blade marked with E&F Hörster Solingen. Sewn leather scabbard with gilded brass hardware. Blade length 77.5 cm. Width: 96cm, Height: 5cm, Depth: 10cm, Weight: 1kg, Condition: Good, Material: Steel, ID: 5080
£776.87
view detailssia antion, riga, latvia
Russian Dragoon Officers&39; Sabre. Model 1910. Zlatoust Arms Factory. The blade is custom-made. The handle bears the sign of Nicholas II, the blade is multi-purpose with text, the sheath is black leather with brass fittings. Width: 12cm, Height: 91cm, Depth: 3cm, Weight: 1.3kg, Condition: Signs of wear commensurate with age, Material: Brass, ID: 4008
£3,280.10
view detailssia antion, riga, latvia
Ceremonial officer&39;s sword with a gilded hilt, with a blued and engraved blade, in a scabbard. Presumably France 19th century. Length 73 cm. Width: 9cm, Height: 73cm, Depth: 4cm, Weight: 2kg, Condition: Signs of wear commensurate with age, Material: Steel, ID: 2735
£820.03
view detailssia antion, riga, latvia
A small ceremonial wakizashi sword made at the end of the Meiji era demonstrates the highest level of craftsmanship by Japanese artisans at the turn of the 19th–20th centuries. The handle and sheath are completely covered with detailed bone carvings depicting scenes from mythology, samurai battle scenes, and traditional ornamental motifs. The guard (tsuba) is made of metal with gilded elements, creating a harmonious combination with the skillful bone carving. The steel blade has a slight curvature characteristic of traditional wakizashi and is decorated with engravings depicting dragons and plant motifs. The scabbard is decorated with three-dimensional reliefs, including symbols of luck and strength, such as mythical creatures, a dragon and heroic characters from Japanese epics. Materials: Metal, bone. Dimensions: Height: 8 cm., Width: 55 cm. Blade length: about 35 cm. Width: 54cm, Height: 8cm, Depth: 8cm, Weight: 1.5kg, Condition: Requires restoration, Material: Bone, ID: 2426
£1,294.78
view detailssia antion, riga, latvia
Short sword of the samurai Wakizashi, Nanki Hatakeyama Yamato no Sukemasatsugu. With the imperial chrysanthemum emblem. The blade is signed and dated. Blacksmith Yamato 1840 - 1860. Nanki Hatakeyama Yamato no sukematsugu. Tsuba and Fuchi are signed. Blade size: +-64.5cm. Length of the sword in a lacquered wooden scabbard: 72 cm. Width: 8cm, Height: 71cm, Depth: 8cm, Weight: 1kg, Condition: Good, Material: Steel, ID: 8057
£3,366.42
view detailssia antion, riga, latvia
Spear of Kagi-yari. Japan, Shinshinto (Newest Era) period, 1781-1876 (also called the Late Edo period). The classic yari consists of a shaft (ebu or nagae) to which a tip (ho) is attached. The shaft is 1.8-2.5 m long, in cross section, as a rule, round or multifaceted (rather than oval), made of oak or, more rarely, bamboo. The tips were 15-90 cm long and were xiphoid in shape, fastened with a shank (nakago). They allowed to inflict stabbing and chopping blows. Thanks to these tips, yari can be classified as glaives. Sometimes a metal hadome crosspiece was made 30 cm below the tip. Tsuba was common. For more reliable fastening, the end of the shaft was supplied with a fastening sleeve (habaki) and washers (seppa). At the lower end was an undercurrent (ishizuki) that could be used to strike. The upper part of the shaft was varnished and wrapped with a cord (sen-dan-maki). Kagi-yari is a spear with a hook fixed at the base of the tip pointing forward to capture enemy weapons. Length - 205 cm. Width: 20cm, Height: 205cm, Depth: 5cm, Weight: 3kg, Condition: Good, Material: Wood, metal, ID: 6522
£1,726.37
view detailsbore park antiques, nuneaton, united kingdom
French M1786 Hussar Musketoon this particular one is quite an early variation note no ramrod the action is in good working order no damage to the musket too length in total 88 cm height being...
£1,250.00
view detailsbore park antiques, nuneaton, united kingdom
Superb condition the nob having a sharp edge on one side very well balanced throwing club, made from south seas hard wood length of 60 cm diameter of nobs 8 cm sticks diameter from nob...
£495.00
view detailssia antion, riga, latvia
Swedish naval saber, officer. 1876 The gilded brass hilt with an anchor is at the same time a limiter for the engraved blade. The handle is in the shape of a lion, covered with stingray leather. Gold sewing lanyard. Leather scabbard with brass. Length: 90 cm. Width: 14cm, Height: 90cm, Depth: 14cm, Weight: 2kg, Condition: Signs of wear commensurate with age, Material: Leather, ID: 5575
£820.03
view detailsbore park antiques, nuneaton, united kingdom
Large & Heavy South Seas War Club overall condition superb circa early 19th century standing 102 cm high clubs head length across being 15 cm depth of 5 cm, a fine example of these rare...
£2,950.00
view detailsbore park antiques, nuneaton, united kingdom
Circa 1800 in good condition short hand held stabbing spear length of 50 cm width of blade end being 6 cm depth of 25 mm, offering free worldwide delivery reference DRC8 Tel: +44 7505 165...
£495.00
view detailsbore park antiques, nuneaton, united kingdom
English made, the best of quality conditions superb, heavy and large in size probably Coach use, the actions strong and in perfect working order, overall length of 76 cm height 15 cm diameter of barrels...
£2,950.00
view detailsbore park antiques, nuneaton, united kingdom
Rare rifle, in good condition and working order offering free delivery UK reference IML
£750.00
view detailsbore park antiques, nuneaton, united kingdom
Dagger and scabbards in quite good condition seeing the age of the two, 2WW issued offering free UK delivery, reference BBC1 Tel: +44 7505 165 843 We accept online payments for all our items listed:...
£850.00
view detailssia antion, riga, latvia
A sword stand (katana`kake) made of black lacquered wood, designed to accommodate three swords. It is decorated with mother-of-pearl inserts on the sides and edges. On the front side, a coat of arms is made in gold lacquer, depicting a mandarin surrounded by a circle. Dimensions: Height 42.5 cm, Width 44 cm. 20th century. Width: 44cm, Height: 42cm, Depth: 20cm, Weight: 3kg, Condition: Good, with traces of use, Material: Wood, mother of pearl, ID: 11141
£1,726.37
view detailssia antion, riga, latvia
Knight armour. Wrought iron. Historical and detailed knight`s armor on a wooden support and base. Helmet with neck strap, folding visor and neck protection. Cuirass with sleeves and plate apron. Shoulders, elbow pads, armor gloves. Knee pads and leg protection. Engraved decoration with stylized scrolls of leaves, partially heads of dragons and horsemen, as well as stylized coats of arms. Total height 190 cm. Decorative knight`s armor made of wrought iron with engraving on the pedestal. Germany. 19th-20th century. Weight 35 kg. Width: 80cm, Height: 190cm, Depth: 50cm, Weight: 40kg, Condition: Good, Material: Metal, ID: 8808
£5,610.70
view detailssia antion, riga, latvia
Lightweight, round shape, kanshitsu samurai hat. External flat, the surface is covered with black varnish with craquelure. In the front is a beautiful golden sign: Maru-ni-mitsu-ohgi-mon (three fans in a circle), on the sides are two kanji Hayashi (indicating the name of the samurai). Red lacquer interior with raised hem, complete with futon and lined drawstrings. Diameter: 42cm. Width: 42cm, Height: 42cm, Depth: 10cm, Weight: 1kg, Condition: Good, Material: Fabrics, ID: 7723
£604.23
view detailssia antion, riga, latvia
Model of Japanese Yoroi armor, late 19th century. With an elegant golden kabuto equipped with large fuki-gaeshi with mon. All armor features gilded black lacquer plates with orange and green lacing. The remaining elements (kote, sode, kusazuri and suneate) are also gilded and decorated with tassels. Original wooden case with metal locks. Beautiful, large, varnished bit gusoku. 34x45x28 cm. Armor height is about 84 cm. Width: 45cm, Height: 84cm, Depth: 28cm, Weight: 15kg, Condition: Good, Material: Gilding, ID: 7721
£4,747.52
view details